Commercial and Residential
Heating & Cooling HVAC Services

(403) 226-6066emergency furnace/heating repair 24/7

Furnace Installation - Calgary

Stat Climate Control Solutions is a qualified, licensed heating company in Calgary. Proper furnace installation requires choosing the correct size of furnace for heating while factoring in the entire home’s square footage. Additionally, you’ll want to select a furnace that is quiet and is energy efficient as this will help, over time, to offset the purchase price for a new furnace.

Our expertise and 100% Customer Satisfaction Guarantee assures you that the furnace you choose will be installed correctly and you can enjoy home comfort for years to come.

For a free estimate for Furnace Installation call (403) 226-6066

Furnace Installation

If your furnace is nearing the end of its lifecycle and you are constantly paying for expensive repairs you may be better off in the long-run with a new furnace installation.

Because many homeowners do not have their furnaces maintained and cleaned regularly additional unseen costs may be lost through poor heat inefficiency with much of the potential heat lost before being vented from the home. Upgrading your heating system with a new Energy Star unit can save you money with utility bills as today’s furnaces have a 92% - 98.7% AFUE Rating and waste very little energy needed for heating. The minimum energy efficiency rating in Canada is 92% AFUE.

new furnaces include manufactuer's warranty and labour warranty

Emergency Furnace Replacement

If you need furnace replacement in Calgary or area, call us and we'll get the job done quickly and ensure it's installed correctly.

Furnace Installation Satisfaction Guarantee

Caution must be taken when shopping for the lowest furnace prices as this price does not include installation and installation costs can vary depending on the location of the furnace, existing ductwork and any additional work needed to achieve safety codes which may have changed since the installation of your old furnace. Although the price of a new furnace is important, it is just as important to make sure you get a quote for the complete installation and confirm it includes the manufacturers warranty.

Stat Climate Control Solutions has competitively priced furnaces fully warranted and we also warranty all work provided by us for one year upon furnace installation.


Furnace Replacement Cost and Prices - Calgary

The cost for a new furnace replacement is dependant on the square footage of a home and the BTU output of the unit required.

Goodman GMSS96, 96% AFUE Rating, Installed for $2,900.00 Goodman GMSS96
Furnace Replacement Installation Price
$2,900.00 In stock
Heavy-duty aluminized-steel tubular heat exchanger, Stainless-steel secondary, Single-stage gas valve, Durable silicon nitride igniter, Quiet single-speed induced draft blower, Self-diagnostic control board for fast repairs
Rated 4.8 / 5 based on 2237 customer reviews

Furnace prices start at $2900.00 which includes *basic installation and as mentioned this price can vary depending on additional work needed for ductwork and any electrical, venting or piping needed for safety codes.

Ultra high-efficiency furnaces with an AFUE Rating of 97% - 98.7% can typically increase the cost of a new furnace by $500 - $1,000.

*basic installation - the ductwork is in good working order and installation can be done without customized design solutions needed.

parts & labour warranty

Furnace Prices include

  • 10 year parts warranty
  • 1 year labour warranty
  • No diagnostic fee should your new furnace need repair as long as you own your home
  • No payment required until your are satisfied with the installation

Importance of AFUE

The AFUE Rating or Annual Fuel Utilization Efficiency measures the efficiency for fuel consumption by the furnace and can help you determine how much money you spend on heating your home. To simplify, a furnace with an AFUE rating of 95 equates to 95% of the fuel being converted to useable heat. Another way to look at it is if you have an older furnace with an AFUE rating of 80% - you’re spending an additional 20% on your utility bill for unused energy when heating your home.

Potential Savings

New Furnace Features to Save Operating Cost

The latest energy efficient furnaces available today can include some design features that will save you money and reduce your carbon footprint.

  • ECM Motors (Electronically Commutated Motor) for delivering consistent airflow for maximized heating efficiency
  • Dual Heat Exchangers allows the furnace to transfer more heat from the natural gas before the warm air is circulated through the ductwork
  • Electronic Ignition Systems for igniting the furnace burner replacing pilot lights which were much less energy efficient, reliable and safe
  • Programmable and Smart Thermostats allows you to adjust the temperature inside the home when you are sleeping or away during work hours. Older thermostats were set and left. Newer thermostats can be programmed to lower the home’s temperature when it’s not needed. This is important as lowering your thermostat by just 1 degree at night, while sleeping, you can reduce your heating bill by 2% every year, and programmable thermostats can also increase the home’s temperature just before you get up in the morning

Smart Thermostats can keep you comfortable and save you money

Zone Control for Better Comfort

Most homes have rooms that are colder or warmer than other rooms. This uneven temperature distribution is due to many factors including; top floors being warmer as heat rises (air is less dense when heated), rooms with large windows warmed by the sun, high-ceilings having less heat retention than lower ceilings and basements typically being the coldest place in the home because they are more humid and cold air (opposite to warm air) goes down.

You can have better control of temperature for rooms in homes and commercial buildings with zone controls, which have thermostats for each zone or area you want to control temperature. When a room’s desired temperature is reached the thermostat closes the damper, within the ductwork, preventing further heating or cooling while the system continues to supply other rooms with more demand. The result: each zone has better or even temperature distribution throughout the home or building.

One of the advantages for zone control is the ability to reduce heating or cooling for rooms that aren’t used very often, such as guest rooms, where the damper can be closed when not needed - saving you energy costs and maximizing comfort.

Some advanced zone control systems allow you to set temperatures via wifi using your computer devices.

Why Choose Stat Climate Control Solutions for Furnace Replacement

  • Free Furnace estimates and advice
  • Up to 10 year Furnace manufacturer warranty
  • Furnace installation design solutions
  • Experienced trained and licensed Furnace technicians
  • Competitive Furnace prices
  • Finance and credit available for new Furnace installations
  • Furnace service and maintenance packages
  • 24 hour 7 days a week furnace repair

24 Hour Emergency Furnace Repair


If you need help right away with your heating system in Calgary and area call STAT Climate Control Solution. We feature 24 emergency service 7 days a week. We can minimize your discomfort and get your home back in the comfort zone as soon as possible.

Furnace Repair read more

Call (403) 226-6066

Your Satisfaction Guaranteed

100% STATisfaction Guarantee* – We agree to accept responsibility for your complete satisfaction with materials and work provided by us within the first year of service following our work. Should you be unhappy or dissatisfied with any equipment or HVAC services we have provided for any legitimate reason, we will repair or replace the parts you were charged for at no cost to you.

You will not be asked for any payments until you are completely satisfied with our service or installations.

* Some restrictions apply. Installed units must be maintained by us as per manufacturer guidelines. All service or repairs must be completed by STAT Climate Control Solutions – use of unauthorized third party contractors on installed equipment will void guarantee. Maintenance issues not covered under guarantee – additional charges may apply for after hours work. Please call us for details.

Furnace Financing

We understand that a new furnace can be a lot to take on at once, we can help with financing options to get your new furnace installed immediately.
We work with Smart Home Financial who try and take the hassle out of borrowing and make it simple to qualify. They offer:

  • A quick and easy application process
  • Minimum monthly payment
  • Credit line availability

If you’re interested in financing or would just like to discuss what your options are for staying warm and comfortable contact us today.